Table 3-7 Network Communication System; Table 3-8 Network Status Indication; Table 3-9 Print Communication Protocol (Lpr) - Seiko RP-F10 Series Technical Reference

(NOTE) • Do not insert a customer display connector cable, drawer kick out connector
cable, and general public line to the 10BASE-T/100BASE-TX LAN connector.
• Be sure to connect the aerially wired LAN cable outside to this product via
surge-proof devices. Otherwise, induced lightning may damage devices.
(4) LED
Indications of each LED installed on both sides in the bottom of the connector mean the following:
(5) Initialization of Communication Settings
It is possible to restore to the communication settings at the shipping by the switch operation.
See "(2) How to Set the Function Using the Switches" in "4.1.1 Changing Memory Switch".
(6) Protocol
Basic communication protocol
IPv4, ARP, ICMP, UDP, TCP
Print communication protocol
LPR: Transfers print data.
Port No.
Maximum number of
concurrent connections
Number of printable
connections
Timeout

Table 3-7 Network Communication System

Indication
100 Mbps
10 Mbps

Table 3-8 Network Status Indication

Indication
Connected
Disconnected
Data transferred

Table 3-9 Print Communication Protocol (LPR)

515
8 (It changes depending on the connection situation of other
protocols such as TCP Socket Port.)
1 (Other users wait the completion of printing.)
Approx. 5 minutes (This value is changeable.)
LED (Orange)
On
Off
LED (Green)
On
Off
Blink
3-8