Gs 'P' X Y Set Basic Calculation Pitch - Seiko RP-F10 Series Technical Reference

ESC SP
FS 'S'
ESC '3'
ESC '2'
Related Commands ESC 'L'
GS 'P' x y
Code 1DH 50H x y
Definition Range
Default x = 203, y = 203 (Minimum pitches of the printer)
Function Sets the basic calculation pitch in the horizontal direction to 1/x inches, and the basic
calculation pitch in the vertical direction to 1/y inches.
When x = 0 and/or y = 0, x and/or y returns to the default value.
Notes The horizontal direction means the direction perpendicular to paper feed, and the vertical
direction means the paper feed direction.
In the standard mode, the following parameters are used regardless of the character
orientation (inversion (flip), 90° right rotated, etc.).
Commands that use x: ESC SP, ESC '$', ESC '\', FS 'S', GS 'L', GS 'W'
Commands that use y: ESC '3', ESC 'J', ESC 'j', GS 'V'
In the page mode, the following parameters are used depending on the character orientation.
When the starting point is "upper left" or "lower right" through "Select Print Direction in Page
Mode" command (ESC 'T') (Characters are mapped in the direction perpendicular to paper
feed.)
Commands that use x: ESC SP, ESC '$', ESC 'W', ESC '\', FS 'S'
Commands that use y: ESC '3', ESC 'J', ESC 'W', GS '$', GS '\'
When the starting point is "upper right" or "lower left" through "Select Print Direction in Page
Mode" command (ESC 'T') (Characters are mapped in the paper feed direction.)
Commands that use x: ESC '3', ESC 'J', ESC 'W', GS '$', GS '\'
Commands that use y: ESC SP, ESC '$', ESC 'W', ESC '\', FS 'S'
Executing this command does not affect various settings that have been already set (line
spacing, character spacing, etc.).
When the calculation result combined with other commands is a fractional figure, it is
corrected using the minimum pitch of the printer, and the remainder is discarded.
Related Commands ESC SP, ESC '$', ESC '\', ESC '3', ESC 'J', ESC 'j', ESC 'W', FS 'S', GS '$', GS '\',
Set Character Right Spacing
Set Kanji Spacing
Set Line Spacing
Set 1/6 Inch Line Spacing
0 ≤ x ≤ 255
0 ≤ y ≤ 255
GS 'L', GS 'W', GS 'V'
6-35
Set Basic Calculation Pitch