Ethernet + Usb Host Model; Ethernet Interface; Table 3-5 General Specifications Of Ethernet Interface; Table 3-6 Pin Assignment Of Ethernet Interface - Seiko RP-F10 Series Technical Reference

3.2 ETHERNET + USB HOST MODEL

3.2.1 Ethernet Interface

(1) General Specifications
Communication standards
Communication protocol
Basic protocol
Print protocol
(2) Pin Assignment
Terminal
No.
1
2
3
4
5
6
7
8
(NOTE) Use a cable that conforms to the category 5 or higher.
(3) Connector
Printer side connector: RJLTC-202TA (TAIMAG) or equivalent (RJ-45)
Push the LAN cable into the LAN connector until it clicks.

Table 3-5 General Specifications of Ethernet Interface

Item
10BASE-T, 100BASE-TX
IPv4, ARP, ICMP, UDP, TCP
LPR, TCP Socket Port

Table 3-6 Pin Assignment of Ethernet Interface

Terminal Input/Output
Name Direction
TXP Input/Output
TXN Input/Output
RXP Input/Output
N.C. -
N.C. -
RXN Input/Output
N.C. -
N.C. -
Figure 3-5 Connector
Specifications
Function
Transmission+
Transmission-
Reception+
-
-
Reception-
-
-
3-7