Test Print; Figure 4-7 Test Print Sample - Seiko RP-F10 Series Technical Reference

4.3 TEST PRINT

The printer can perform a test print.
In the test print, the firmware version, the MS setting values, etc. are printed.
1. Load thermal paper in the printer.
Ensure that no error occurs, and then turn off the printer.
2. Hold the FEED Switch down and press the POWER Switch, then release the POWER Switch first.
Release the FEED Switch when the test print has been started.
3. After the test print, the printer cuts the thermal paper and returns to the print-ready status.

Figure 4-7 Test Print Sample

4-21