Figure 4-4 Function Selection Message (Example: Selected Ms1) - Seiko RP-F10 Series Technical Reference

HINT
• For "11: I/F Setting", the items to be set are different for each interface.
• USB Interface
• Ethernet Interface
• Bluetooth Interface
5. A message for selecting the function assigned to the selected MS is printed as a sample shown in
Figure 4-4.
Press the FEED Switch the number of times corresponding to the selected function number, and then
press the POWER Switch.
[Function selection of I/F Setting]
0 : Return to MS selection.
1 : LAN Factory Default Setting
Press the FEED switch an equal
number of times to the selected number.
After that, press the POWER SW.
The USB Device Class can be changed.
[Function selection of I/F Setting]
0 : Return to MS selection.
1 : LAN Factory Default Setting
Press the FEED switch an equal
number of times to the selected number.
After that, press the POWER SW.
Communication settings can be initialized.
[Function selection of I/F Setting]
0 : Return to MS selection.
1 : Auto Connection
2 : Security Mode
3 : Inquiry Response
4 : Association model
Press the FEED switch an equal
number of times to the selected number.
After that, press the POWER SW.
The Bluetooth setting can be changed.
[Function selection of MS1]
0 : Return to MS selection.
1 : Standby LED
2 : Auto Activation by AC
3 : Power SW
Press the FEED switch an equal
number of times to the selected number.
After that, press the POWER SW.
・When pressing the FEED Switch once, "1 : Standby LED" is selected.
・When pressing the POWER Switch without pressing the FEED Switch,
"0 : Return to MS Selection" is selected.
Figure 4-4 Function Selection Message
(Example: Selected MS1)
4-4