Register 1-Byte Font International Character - Seiko RP-F10 Series Technical Reference

Notes This command is valid only during download mode.
The memory usage m is calculated by the formula below.
m = Number of data bytes + Number of bytes of memory control information
Related Commands ESC 't'
'S' 'R' a b c [d]k
Code 53H 52H a b c [d]k
Definition Range
Function Registers the international character of 1-byte font registered by the "Rewrite 1-Byte Font"
command.
B : Font size
c : Country number
d : Font data
k : Number of font data bytes
This command requires the number of data bytes + memory control information bytes in the
user area of the FLASH memory.
The font data registered by this command can be used by selecting the country registered by
the "Select International Character" command (ESC 'R' n) while specifying n to 255 with the
"Select Character Code Table" command (ESC 't'). The data is assigned in the order of 23H,
24H, 40H, 5BH, 5CH, 5DH, 5EH, 60H, 7BH, 7CH, 7DH and 7EH, and requires 12 characters.
At the shipping, the 1-byte font international character by this command is not registered.
b Font Size
0 24-dot font
1 16-dot font
Font data format
<1-byte character>
<24- dot font 24×12>
12 dots
d1
d1
d3
24 dots
d47
0 1 2 3 4 5
LSB
a = 255
b = 0, 1
0 ≤ c ≤ 17
0 ≤ d ≤ 255
k = 576 (when b = 0)
k = 192 (when b = 1)
Number of Font Data Bytes (k2)
10752 byte
3584 byte
d2
d4
16 dots
d48
6 7
MSB

Register 1-Byte Font International Character

6-115
<16- dot font 16×8>
8 dots
d1
d2
d16
0 1 2 4 6 7
3 5
LSB MSB