Printing Command; Printingcommand; Lf Line Feed; Ff Print And Return To Standard Mode - Seiko RP-F10 Series Technical Reference

6.5.1 Printing Command

LF
Code 0AH
Function [In standard mode]
Prints the data in the line buffer and performs line feed based on the set line spacing.
[In page mode]
Moves the mapping start position to the beginning of the next line based on the set line
spacing.
Related Commands ESC '2', ESC '3'
FF
Code 0CH
Function In page mode, prints the data mapped in the whole print area in batch and returns to standard
mode.
Notes This command is valid only when page mode is selected. Ignored when standard mode is
selected.
All the mapped data is deleted after printing.
Thermal paper cut, etc. are not performed.
The beginning of the line is the next printing position.
The print area set by "Set Print Area in Page Mode" command (ESC 'W') is initialized.
Related Commands ESC FF, ESC 'L', ESC 'S'
CR
Code 0DH
Function This command is ignored.
ESC FF
Code 1BH 0CH
Function Prints all data mapped in the page buffer in batch in page mode.
Notes This command is valid only when page mode is selected. Ignored when standard mode is
selected.
The mapped data, setting values of the "Set Print Area in Page Mode" command (ESC 'W')
and the "Select Print Direction in Page Mode" command (ESC 'T'), and mapping start
positions are still retained after printing. Thermal paper cut, marked paper form feed etc. are
not performed.
Related Commands FF, ESC 'L', ESC 'S'
Print and Return to Standard Mode
6-17
Line Feed
Carriage Return
Print Data in Page Mode