Table 4-25 General Setting 18 (Ms18); Table 4-26 Buzzer Count Selection (Ms18-1 To 2); Table 4-27 Buzzer Pattern Selection (Ms18-3 To 4) - Seiko RP-F10 Series Technical Reference

14. General Setting 18 (MS18)
Sets the external buzzer to beep with "Generate Pulse" command (ESC 'p') and "Generate Pulse in
Real Time" command (DLE DC4 fn).
• Buzzer Count Selection (MS18-1 to 2)
The beeping times can be selected.
• Buzzer Pattern Selection (MS18-3 to 4)
The buzzer pattern of can be selected.
• Buzzer Volume Selection (MS18-5)
The buzzer volume can be selected.
Low: Beeps at buzzer drive frequency 1kHz.
Loud: Beeps at buzzer drive frequency 4kHz.
MS
Buzzer Count Selection
18-1 to 2
(Buzzer Count)
Buzzer Pattern Selection
18-3 to 4
(Buzzer Pattern)
Buzzer Volume Selection
18-5
(Buzzer Volume)
18-6 to 8 Reserved
15. Reserved (MS19 to 38)
MS19 to 38 are all reserved. To write all 40 bytes, send FFH as values of MS19 to 38.

Table 4-25 General Setting 18 (MS18)

Function

Table 4-26 Buzzer Count Selection (MS18-1 to 2)

MS18-2 MS18-1
0 0
0 1
1 0
1 1

Table 4-27 Buzzer Pattern Selection (MS18-3 to 4)

MS18-4 MS18-3
0 0
0 1
1 0
1 1
0
See Table 4-26
See Table 4-27
Low
-
Buzzer Count
None
Once
Thrice
Five Times
Buzzer Pattern
Pattern1
Pattern2
Pattern3
Pattern4
4-19
Value
1
Loud
Fixed