Kanji; Fs '&' Specify Kanji Mode; Fs '.' Cancel Kanji Mode; Specify Kanji Print Mode - Seiko RP-F10 Series Technical Reference

6.5.9 Kanji

FS '&'
Code 1CH 26H
Function Specifies the Kanji mode.
Notes When the Kanji code system is the Shift-JIS code system, inputting this command executes
only the internal flag operation of the printer. In this case, printing is not affected.
The Kanji code is processed in order of the 1st byte and the 2nd byte.
Related Commands FS '.', FS 'C'
FS '.'
Code 1CH 2EH
Function Cancels the Kanji mode.
Notes When the Kanji code system is the Shift-JIS code system, inputting this command executes
only the internal flag operation of the printer. In this case, printing is not affected.
Related Commands FS '&', FS 'C'
FS '!' n
Code 1CH 21H n
Definition Range
Default n = 0
Function Specifies Kanji print modes in batch.
Bit
0
1
2
3
4
5
6
7
Notes When both double height and double width are specified, the character size is quadrupled.
When characters with different vertical scale exist on the same line, the characters are
enlarged with the bottom edges of the characters as a reference, and so the bottom edges are
aligned.
When the character is enlarged horizontally, it is enlarged in the right direction with the left
edge of the character as a reference.
0 ≤ n ≤ 255
Function
Kanji font
Undefined
Double width
Double height
Undefined
Undefined
Undefined
Underline
Value
0
Font A (24 × 24)
-
Cancel
Cancel
-
-
-
Cancel
6-76
Specify Kanji Mode
Cancel Kanji Mode

Specify Kanji Print Mode

1
Font B (16 × 16)
-
Specify
Specify
-
-
-
Specify