Table 4-9 General Setting 4 (Ms4) - Seiko RP-F10 Series Technical Reference

page of 203

/ 203
Contents
Table of Contents
Bookmarks

Table of Contents

General Setting 4 (MS4)

Selects the printer drive method.

• Number of Dots Selection for Fixed Division and Dynamic Division (MS4-1 to 2)

Fixed 2-division is set automatically when the fixed division is selected.

The maximum number of simultaneously activated dots can be selected when the dynamic

division is selected.

Set the number of dots for the dynamic division corresponding to the host environment to avoid

the voltage drop during printing when Powered USB cable is used.

• Division Drive Method Selection (MS4-3)

Fixed division or dynamic division can be selected for the thermal head drive method.

• Paper Width Selection (MS4-4)

The paper width to use can be selected.

• Number of Effective Dots Selection (MS4-5)

The number of printable dots in 1 dot-line can be selected.

• Maximum Print Speed Selection (MS4-7)

The maximum printing speed can be selected in 3 levels.

High:

Middle (Silent): Decreases the maximum print speed to 150mm/s to print silently.

Middle (Quality): Decreases the maximum print speed for printing image to 200mm/s to improve

The speed may be lower than the selected maximum speed due to the thermal head driving

method, environmental temperature, communication method, and so on.

Number of Dots Selection for Fixed

4-1 to 2

Division and Dynamic Division

(Division Method)

Division Drive Method Selection

4-3

(Head Drive)

Paper Width Selection

4-4

(Paper Width)

Number of Effective Dots Selection

4-5

(Number of Effective Dots)

4-6

Reserved

Maximum Print Speed Selection

4-7 to 8

(Print Speed)

Drives at the maximum print speed of 250 mm/s.

the print quality.

Printing of image includes the following:

Raster bit image, graphics data stored in print buffer, NV graphics, downloaded

bit image, bit image mode, barcode, two-dimensional barcode

Printing in the page mode, the whole page is regarded as image.