Switch; Power Switch; Feed Switch - Seiko RP-F10 Series Technical Reference

5.3 SWITCH

There are 2 switches, the POWER Switch and the FEED Switch on this printer.

5.3.1 POWER Switch

The printer can be turned on/off by POWER Switch.
To turn on the printer, hold down the POWER Switch until the LED lights up.
To turn off the printer, hold down the POWER Switch until the LED turns off.
(NOTE) Always use the POWER Switch to turn off the printer. When the printer is turned off
by removing AC adapter, the memory may be damaged.

5.3.2 FEED Switch

The thermal paper can be fed by FEED Switch.
The printer feeds a small amount of thermal paper by pressing the FEED Switch once. The thermal paper is
fed continuously by holding down the FEED Switch.
(NOTE) When an error occurs, the printer does not feed paper by FEED Switch.
5-4