Auxiliary Functions; Select Peripheral Device - Seiko RP-F10 Series Technical Reference

6.5.10 Auxiliary Functions

ESC '=' n
Code 1BH 3DH n
Definition Range
Default n = 1
Function Selects the peripheral device for which data from the host computer is valid.
Notes When the printer is disabled, the printer discards all data except realtime commands from
next data until the printer is enabled again by this command.
ESC '@'
Code 1BH 40H
Function Clears the data in the line buffer and initializes the settings.
Notes The information of the Function Settings is not re-read. The data in the input buffer is retained.
Related Commands See "CHAPTER 7 INITIALIZATION".
DC2 '@'
Code 12H 40H
Function Performs hardware reset.
Notes Performs the same operation as when turning on the power.
When this command is executed during printing, printing is stopped, and reset is performed.
0 ≤ n ≤ 255
Bit Function
0 Printer
1 Undefined
2 Undefined
3 Undefined
4 Undefined
5 Undefined
6 Undefined
7 Undefined
Value
0
Disable
-
-
-
-
-
-
-
6-82

Select Peripheral Device

1
Enable
-
-
-
-
-
-
-
Initialize Printer
Hardware Reset