Two-Dimensional Barcode; Two-Dimensional Barcode; Gs 'N' N Set Nominal Narrow Element Width; Gs 'O' N Set Pdf Module Height - Seiko RP-F10 Series Technical Reference

6.5.8 Two-dimensional Barcode

GS 'n' n
Code 1DH 6EH n
Definition Range
Default n = 3
Function Sets the nominal narrow element width.
Related Commands GS 'p'
GS 'o' n
Code 1DH 6FH n
Definition Range
Default n = 10
Function Sets the PDF module height in dots.
Notes When the module height is set too low, some barcode readers may not be able to read the
barcode.
The minimum height should be 3 dots or more in normal use.
GS 'p' 0 m2 e r c nl nh [d]k
Code 1DH 70H 00H m2 e r c nl nh [d]k
Definition Range
Function Prints PDF417 on the basis of the specified contents.
When m2 = <*******0>B, PDF417 is in normal mode.
When m2 = <*******1>B, PDF417 is in simple mode (Micro PDF is not supported).
e:
r:
c:
nl, nh: Number of data bytes
d:
k:
Notes Only the LSB is valid for m2.
Quiet zones are not secured. Set the quiet zone in accordance with the standard of each
barcode system.
Related Commands GS 'n', GS 'o'
2 ≤ n ≤ 8 (number of dots)
2 ≤ n ≤ 127
0 ≤ m2 ≤ 255
0 ≤ e ≤ 8
r = 0, 3 ≤ r ≤ 90
c = 0, 1 ≤ c ≤ 30
0 ≤ d ≤ 255
0 ≤ nl ≤ 255, 0 ≤ nh ≤ 255
1 ≤ k(= nh × 256 + nl) ≤ 499
Error correction level
Number of rows (0 is automatically set)
Number of columns in the data area (0 is automatically set)
Data
Number of data bytes specified by nl and nh
Set Nominal Narrow Element Width
6-69
Set PDF Module Height

Print PDF417