Gs 'P' 4 1 H N [D]N Print Gs1 Databar Stacked Omni-Directional; Gs 'P' 4 2 S N [D]N Print Gs1 Databar Expanded Stacked; Select Qr Code Model - Seiko RP-F10 Series Technical Reference

GS 'p' 4 1 h n [d]n
Code 1DH 70H 04H 01H h n [d]n
Definition Range
Function Prints GS1 Databar Stacked Omni-directional data on the basis of the specified contents.
n: Number of data bytes
h: Height of GS1 Databar Stacked Omni-directional in modules
d: Input data of GS1 Databar
Enter 13 characters using numbers from '0' to '9'.
'01' at the beginning is automatically added, and the check digit is automatically calculated
by the printer.
Notes When any value out of the definition range is specified, this command is ignored, and the
subsequent data is processed as normal data.
When the horizontal width of GS1 Databar exceeds the print area, this command is ignored.
In the standard mode, when there is data in the line buffer, this command is ignored.
In the standard mode, alignment and inversion (flip) printing are valid.
Related Commands ESC 'a', ESC '{'
GS 'p' 4 2 s n [d]n
Code 1DH 70H 04H 02H s n [d]n
Definition Range
Function Prints GS1 Databar Expanded Stacked on the basis of the specified contents.
n: Number of data bytes
s: Number of segments (Even number from 2 to 20)
d: Input data of GS1 Databar
Enter any number of characters using ' ', '!', '"', '%', '&', ''', '(', ')', '*', '+', ',', '-', '.', '/', ':', ';',
'<', '=', '>', '?', '_', '0' to '9', 'A' to 'Z', and 'a' to 'z'. Enter '{1' for FNC1.
Be sure to input the check digit because it is not automatically calculated by the printer.
Notes When any value out of the definition range is specified, this command is ignored, and the
subsequent data is processed as normal data.
When the horizontal width of GS1 Databar exceeds the print area, this command is ignored.
In the standard mode, when there is data in the line buffer, this command is ignored.
In the standard mode, alignment and inversion (flip) printing are valid.
Related Commands ESC 'a', ESC '{'
GS '(' 'k' pL pH '0' fn n1 n2
Code 1DH 28H 6BH pL pH cn fn n1 n2
Definition Range
Default n1 = 50, n2 = 0
33 ≤ h ≤ 255, n = 13, 48 ≤ d ≤ 57
2 ≤ s ≤ 20 (even number only), 1 ≤ n ≤ 255
pL = 4, pH = 0
cn = 49
fn = 65
n1 = 49, 50
n2 = 0
Print GS1 Databar Stacked Omni-directional
Print GS1 Databar Expanded Stacked
6-73

Select QR Code Model