Gs '!' N Specify Character Size - Seiko RP-F10 Series Technical Reference

ESC 'M' n
Code 1BH 4DH n
Definition Range
Default n = 0
Function Selects a character font.
Notes The character font can also be selected by the "Specify Print Mode" command (ESC '!'), but
the setting of the command processed last is valid.
Related Commands ESC '!'
GS '!' n
Code 1DH 21H n
Definition Range
Default n = 0
Function Specifies a character size (vertical scale / horizontal scale).
Bit
0 to 3
4 to 7
Table 1 Vertical Scale
Hexadecimal Decimal
00H
01H
02H
03H
04H
05H
06H
07H
n = 0, 1, 48, 49
n
0, 48 Select font A (24 × 12)
1, 49 Select font B (16 × 8)
0 ≤ n ≤ 255
1 ≤ vertical scale ≤ 8, 1 ≤ horizontal scale ≤ 8
Function
Vertical scale See Table 1 [Vertical Scale].
Horizontal scale See Table 2 [Horizontal Scale].
Scale
0 × 1 (default)
1 × 2 (double height)
2 × 3
3 × 4
4 × 5
5 × 6
6 × 7
7 × 8
Function
Value
Hexadecimal
Table 2 Horizontal Scale
Hexadecimal Decimal
00H
10H
20H
30H
40H
50H
60H
70H
6-23
Select Character Font
Specify Character Size
Decimal
Scale
0 × 1 (default)
16 × 2 (double width)
32 × 3
48 × 4
64 × 5
80 × 6
96 × 7
112 × 8