Figure 3-2 Screen Of [Usb] Tab In Sii Communication Settings Utility For Windows - Seiko RP-F10 Series Technical Reference

(6) iSerialNumber
USB iSerialNumber can be set.
(a) When the USB Device Class is set to "Printer Class"
To set iSerialNumber, there are the following 2 ways:
• Using the utility
Use "SII Communication Setting Utility for Windows", or Communication Settings Utility in
"Communication Software Package for RP Series Printer".
See "SII Communication Setting Utility for Windows User's Guide" for RP-F10 series, or "RP
Series Communication Software User's Guide" for details.
The screen of SII Communication Setting Utility for Windows is shown in Figure 3-2 as an
example.

Figure 3-2 Screen of [USB] Tab in SII Communication Settings Utility for Windows

• Using the command
See "Set iSerialNumber" command (DC2 'u' 0, DC2 'u' 1).
(b) When the USB Device Class is set to "Vender Class"
To set iSerialNumber, there are the following 2 ways:
• Using the utility
Use Communication Settings Utility in "Communication Software Package for RP Series Printer".
See "RP Series Communication Software User's Guide" for details.
• Using the command
See "Set iSerialNumber" command (DC2 'u' 0, DC2 'u' 1).
(NOTE) • iSerialNumber is not initially set.
• When multiple printers use the same iSerialNumber, do not connect the printers
to the host at the same time.
• iSerialNumber must be set only when the printer is installed.
• iSerialNumber can input 1-byte alphanumeric characters only.
3-3