Dc3 '-' Set Ruled Line Off; Dc3 'A' Select Ruled Line A; Dc3 'B' Select Ruled Line B; Dc3 'C' Clear Ruled Line Buffer - Seiko RP-F10 Series Technical Reference

DC3 '-'
Code 13H 2DH
Default Ruled line OFF
Function Sets the ruled line to OFF.
Notes After this command, ruled line is not printed.
Related Commands DC3 '+'
DC3 'A'
Code 13H 41H
Default Ruled line buffer A selected
Function Selects ruled line buffer A.
Notes Following this, ruled line data is set for the ruled line buffer A, and the image of the ruled line
buffer A is printed out.
After using this command, the setting or printing for the ruled line buffer only applies to the
ruled line buffer A.
Related Commands DC3 'B'
DC3 'B'
Code 13H 42H
Default Ruled line buffer A selected
Function Selects ruled line buffer B.
Notes Following this, ruled line data is set for the ruled line buffer B, and the image of the ruled line
buffer B is printed out.
After using this command, the setting or printing for the ruled line buffer only applies to the
ruled line buffer B.
Related Commands DC3 'A'
DC3 'C'
Code 13H 43H
Default All data of both ruled line buffer A and B cleared
Function Clears all bits of the selected ruled line buffer to 0.
6-111
Set Ruled Line OFF
Select Ruled Line A
Select Ruled Line B
Clear Ruled Line Buffer