Send Error History; Dc3 '(' 'C' 'L' 'R' '); Clear Buffer At Error - Seiko RP-F10 Series Technical Reference

Bit
0
1
2
3
4
5
6
7
Related Commands GS 'r', DC2 'w', DC2 'l'
DC2 '0' 'c' n
Code 12H 30H 63H n
Definition Range
Function The printer records an error as a history when it occurs.
In response to the request of this command, the printer sends the error history by HEX code.
Specify the target history number by n.
When the specified history number does not contain data, 00H data is sent.
Executing this command stops collecting the error history.
To resume collecting error history, specify again the data of history number that has been
once specified, or read data of n = 255.
The data sent in the error history is as follows:
The 1st to 4th byte:
The 5th to 12th byte: Response value of automatic status response
Notes The number of data bytes to be sent is 2 bytes of header and footer + 12 × 2 = 26 bytes.
Related Commands See "6.4 RESPONSE DATA".

DC3 '(' 'c' 'l' 'r' ')'

Code 13H 28H 63H 6CH 72H 29H
Function The printer clears the input buffer and the line buffer upon receiving this command and
returns from parameter waiting.
(6) The 6th Byte to the 8th Byte (Reserved)
Function
Reserved
Reserved
Reserved
Reserved
Identifier
Identifier
Identifier
Identifier
See "6.4 RESPONSE DATA".
0 ≤ n ≤ 255
Elapse time (seconds) after turning on the power
0
Fixed to 1
Fixed to 1
Fixed to 1
Fixed to 1
Fixed to 1
Fixed to 0
Fixed to 1
Fixed to 1
6-100
Value
1

Send Error History

Clear Buffer at Error