Table of Contents
Advertisement
Related Commands GS 'P'
FS 'W' n
Code
1CH 57H n
Definition Range
Default
n = 0
Function Specifies or cancels the quadrupled character of Kanji.
When n = <*******0>B, the quadrupled character is canceled.
When n = <*******1>B, the quadrupled character is specified.
Notes
Only the LSB is valid for n.
Quadrupled characters are the characters for which double height and double width are
specified simultaneously.
When the quadrupled character is canceled using this command, the printer prints characters
of normal size after the next character.
When characters with different vertical scale exist on the same line, the characters are
enlarged with the bottom edges of the characters as a reference, and so the bottom edges are
aligned.
When the character is enlarged horizontally, it is enlarged in the right direction with the left
edge of the character as a reference.
In addition to this command, the quadrupled character can also be specified or canceled by
simultaneously specifying double width and double height in the "Specify Kanji Print Mode"
command (FS '!'). However, the command processed last is valid. For example, when the
quadrupled character is canceled by this command after double height and double width are
specified by the "Specify Kanji Print Mode" command (FS '!'), the specification in the "Specify
Kanji Print Mode" command (FS '!') is canceled.
Related Commands FS '!'
DC2 '.' n
Code
12H 2EH n
Definition Range
Default
n = 0
Width
Left space
0 ≤ n ≤ 255
n = 0, 1, 48, 49
漢
Height
Right space
Specify/Cancel Kanji Quadruple-Size
6-79
Select Kanji Font
Advertisement
Chapters
Table of Contents
