Send 2-Byte Font Id; Register User-Defined Character - Seiko RP-F10 Series Technical Reference

Function Selects Kanji font.
Notes The Kanji font can also be selected by the "Specify Kanji Print Mode" command (FS '!'), but
the command processed command last is valid.
Related Commands
FS 'I' a b c
Code 1CH 49H a b c
Definition Range
Function In response to the request of this command, the printer sends the information specified by c,
the 2-byte font specified by a and b.
a: Font size
b: Font type number
c: Information
Notes When a or b is out of the definition range, only the header and footer of the response format
of the selected function are sent.
Related Commands
FS '2' c1 c2 [d]k
Code 1CH 32H c1 c2 [d]k
Definition Range
n
0, 48 Select font A (24 × 24)
1, 49 Select font B (16 × 16)
FS '!'
a = 0
b = 0
0 ≤ c ≤ 5
c Function
0 Language
1 Standard
2 Company name
3 Checksum (4 bytes)
4 Data size
5 ROM ID
See "6.4 RESPONSE DATA".
The definition range differs depending on the Kanji code system.
When JIS code system is specified:
c1 = 77H
21H ≤ c2 ≤ 7EH
0 ≤ d ≤ 255
When Shift-JIS code system is specified:
c1 = ECH
40H ≤ c2 ≤ 7EH , 80H ≤ c2 ≤ 9EH
0 ≤ d ≤ 255
Function
Response Format
Character string
Character string
Character string
HEX code
HEX code
HEX code

Register User-Defined Character

6-80

Send 2-Byte Font ID