Table 4-18 General Setting 13 (Ms13) - Seiko RP-F10 Series Technical Reference

9. General Setting 13 (MS13)
Selects the Kanji code system and 180° reverse function.
• Kanji Code System Selection (MS13-1)
The initial Kanji code system can be set to the JIS code or Shift-JIS code system.
• 180° Reverse Function Selection (MS13-2)
The character print direction and start point in the initial page mode can be set. When this function
is enabled, the start point in the page mode is placed in the lower right. See "Select Print Direction
in Page Mode" command (ESC 'T') for details of the print direction and start point.
• Realtime Command Selection (MS13-3)
Enables or disables processing of realtime command.
Realtime commands are ignored when Disable is selected.
The following realtime commands are affected by this setting:
"Generate Pulse in Real Time" command (DLE DC4 fn m t)
"Clear Buffer at Error" command (DC3 '(' 'c' 'l' 'r' ')')
"Printer Reset" command (DC3 '(' 'r' 'e' 's' 'e' 't' DC3 'r' 'e' 's' 'e' 't' ')')
"Stop External Buzzer" command (DEL DC4 fn a n r t1 t2)
"Send Status Data in Real Time" command(DEL EOT n)
(NOTE) When the image data contains the code line matching the code that constitutes a
realtime command, use this setting to disable realtime commands.
MS
13-1
13-2
13-3
13-4 to 8 Reserved
10. Reserved (MS14)
MS14 is reserved. To write all 40 bytes, send F8H as a value of MS14.

Table 4-18 General Setting 13 (MS13)

Function
Kanji Code System Selection
(Kanji Code)
180° Reverse Function Selection
(Reverse Function)
Realtime Command Selection
(Realtime Command)
Value
0
Shift-JIS code
Enable
Disable
-
4-15
1
JIS code
Disable
Enable
Fixed