Selecting The Measurement Units; Setting The Clock; Figure 4-1 The System Screen - Olympus 45MG User Manual

DMTA-10022-01EN, Rev. C, January 2015
3. Press [MEAS] to return to the measurement screen.
4. Turn off the 45MG, and then turn it back on to activate the language change.
4.2

Selecting the Measurement Units

The 45MG can be set to show thickness measurements in inches or millimeters.
To set the measurement units
1. In the measurement screen, press [SETUP], and then select MEAS.
2. In the MEAS screen, set UNIT TYPE to INCH or MILLIMETER.
3. Press [MEAS] to return to the measurement screen.
4.3

Setting the Clock

The 45MG has a built-in date and time clock. You can set the date and the time and
select their format. The 45MG saves all measurement values with their acquisition
date.
To set the clock
1. In the measurement screen, press [SETUP], and then select SP MENU.
2. In the SP MENU (see Figure 4-2 on page 45), select CLOCK.
44 Chapter 4

Figure 4-1 The SYSTEM screen