NEC Univerge SV8100 Programming Manual page 186

Issue 10.1
2 - 150
Item
Item
No.
05
Receive Gain Level for
Conference and Transfer
Calls
Use this option to select the
CODEC gain type used by
the trunk when it is part of an
Unsupervised Conference.
06
SMDR Printout
Use this option to have the
system include/exclude the
trunk you are programming
from the SMDR printout.
Refer to Program 35-01 and
35-02 for SMDR printout
options.
07
Outgoing Calls
Use this option to allow/
prevent outgoing calls on the
trunk you are programming.
08
Toll Restriction
Use this option to enable/
disabled Toll Restriction for
the trunk. If enabled, the
trunk follows Toll Restriction
programming (example:
Programs 21-05, 21-06). If
disabled, the trunk is a toll
free line.
09
Private Line
10
DTMF Tones for Outgoing
Calls
Use this option to enable (1)
or disable (0) DTMF tones for
outgoing trunk calls.
11
Account Code Required
12
--- Not Used ---
Input Data
1~63
(-15.5dB ~ +15.5dB
in 0.5dB intervals)
0 = No Print Out
1 = Prints Out
0 = Deny (No)
1 = Allow (Yes)
0 = Restriction
Disabled (No)
1 = Restriction
Enabled (Yes)
0 = Disable
Private Line
(Normal)
1 = Enable Private
Line (Private
Line)
0 = Disable (No)
1 = Enable (Yes)
0 = Disable (No)
1 = Enable (Yes)
Program 14 : Trunk, Basic Setup
UNIVERGE SV8100
Related
Default
Program
16 (-8dB)
(OT)
32 (0dB)
(AU)
0 (OT) 35-01
1 (AU)
35-02
1
1 21-04
21-05
21-06
0
0
1