NEC Univerge SV8100 Programming Manual page 639

UNIVERGE SV8100


Programming Manual
GOTO Action – Go to Mailbox (7) (GOTO)
Use this option to provide Automated Attendant callers with the ability to route to
Call Routing and Announcement Mailboxes. For example, a caller can dial a
digit for Sales, and then go to the Call Routing or Announcement Mailbox that
provides the dialing options and instructions for Sales.
Number Option
To have Automated Attendant callers dial a single digit to go to a Call Routing or
Announcement Mailbox, enter the mailbox number in the corresponding
Number option.
For example, to have key 1 go to Call Routing Mailbox 01, for key 1 enter
GOTO for the Action and 01 for the corresponding Number.
To have VM8000 InMail require Automated Attendant callers to enter a Call
Routing or Announcement Mailbox to go to, enter XXX in the corresponding
Number option. The key you choose must represent the first digit in the mailbox
number.
For example, to allow callers to go to mailboxes 000~015, for key 0 enter
GOTO for the Action and XXX for the corresponding Number.
To log into any valid Call Routing or Subscriber Mailbox, enter IXXX in the
corresponding Number option.
For example, to allow callers to dial 1 plus any Call Routing or
Announcement Mailbox number to go to, for key 1 enter GOTO for the
Action and IXXX for the corresponding Number.
UND Action – Undefined Routing (0) (UND)
Use this key action if you want a key to have no routing (no operation). When an
Automated Attendant caller presses an undefined key, they hear, That is an
invalid entry. The caller can then dial another option.
Issue 10.1
2 - 603