UNIVERGE SV8100
Program 85 : Hardware Setup for ETIA Switch
Level:
IN
Description
Use Program 85-04: Port Mirroring Setup to define the port mirroring for each ETIA
blade. This permits traffic from one port to be simultaneously transmitted to a second
port. Port mirroring is typically used for debugging with a protocol analyzer.
Input Data
Item
No.
Feature Cross Reference
Programming Manual
Hub Slot
Item
01
0 = Disable
Port Mirroring
1 = Enable
02
1~8
Source Port
03
1~8
Target Port
Conditions
Set to the port where the protocol analyzer is connected.
Voice Over Internet Protocol (VoIP)
85-04: Port Mirroring Setup (AU)
Input Data
Default
0
1
1
1~24
Description
Set to the port to be monitored.
Set to the port where the protocol analyzer
is connected.
Issue 10.1
2 - 853