10-41: General Purpose Contact Detector Setup - NEC Univerge SV8100 Programming Manual

UNIVERGE SV8100
Program 10 : System Configuration Setup
Level:
IN
Description
(This program is aviable for V7000 or higher for AU)
Use Program 10-41: General Purpose Contact Detector Setup to specify the
circuit number used on a PGD Adapter as a contact detection circuit.
Input Data
General Purpose Contact Detector Number
Item
No.
01
02
03
Feature Cross Reference
Analog Communications Interface (ACI)
Programming Manual

10-41: General Purpose Contact Detector Setup

Item
System ID
The user can set System ID when the Link is
active
Slot Number
Define the slot number of the DLC to which the
PGD Adapter is connected
Physical Port Number
Select the port number on the DLC to which
the PGD Adapter is connected.
Relay Circuit Number
Select the relay circuit on the PGD Adapter
module.
Conditions
None
1-8
Input Data
0: Not Using the NetLink
1 - 50: System ID
0 = No Setting
1-24 = Slots 1-24
0 = No Setting
1-16 = Ports 1-16
0 = No Setting
1-2 = Circuit Number 1-2
Issue 10.1
Default
0
0
0
0
2 - 63