System Options For Caller Id - NEC Univerge SV8100 Programming Manual

UNIVERGE SV8100
Level:
IN
Description
Use Program 20-19 : System Options for Caller ID to define the system options for
the Caller ID feature.
Input Data
Item
No.
01
02
03
04
05
07
08
10
Programming Manual
Program 20 : System Option Setup

20-19 : System Options for Caller ID

Item
Caller ID Displaying Format
(if displaying digits are more than 12 digits)
Caller ID Wait Timer
When an incoming CO call is received, the SV8100 starts
the timer. It will wait the programmed time for Caller ID
information from telco before connecting the CO call.
Caller ID Edit Mode
If Caller ID Edit Mode is disabled (0), no trunk access code
will be added to the Caller ID. If this option is enabled (1),
the trunk access code entered in Program 10-02-05 will be
added to the beginning of the Caller ID.
Wait Facility IE Timer
This timer is used with ISDN trunks to determine how long
the system waits for the Caller ID name from the Telco.
Caller ID Sender Queing Time (Sender Wait)
Long Distance Code
Area Code
Message Type Treated as CID for Analog Trunk
Specify message type number which treats as Caller ID
from analog trunk.
Issue 10.1
Input Data Default
0 = First 10
digits
(Upper)
1 = Last 10
digits
(Lower)
0-30 seconds 5 (OT)
2 (AU)
0 = off 0 (OT)
1 (AU)
1 = on
0~64800 seconds
0~64800 seconds
Up to two digits
setting
Up to six digits
setting
0 = '2' only
1 = '2' and '3'
0
10
0
No
No
0
2 - 277