90-11: System Alarm Report - NEC Univerge SV8100 Programming Manual

Issue 10.1
Level:
IN
Description
Use Program 90-11: System Alarm Report to define the details of the system alarm
report.
Input Data
Item
No.
02
04
06
07
08
09
10
11
12
2 - 878
Program 90 : Maintenance Program
Item
Report Method
When alarm reports are e-mailed, set this option to
1. E-mail address set in 90-11-08.
--- Not Used ---
SMTP Host Name
When alarm reports are e-mailed, set the SMTP
name (ex: smtp.yourisp.com). Contact your ISP
(internet service provider) for the correct entry if
needed.
SMTP Host Port Number
When alarm reports are e-mailed, set the SMTP host
port number. Contact your ISP (internet service
provider) for the correct entry if needed.
To E-mail Address
When alarm reports are e-mailed, set this e-mail
address to which the report should be sent.
Reply Address
When alarm reports are e-mailed, set the e-mail
address where replies should be e-mailed.
From Address
When alarm reports are e-mailed, set this e-mail
address for the station sending the report.
DNS Primary Address
When alarm reports are e-mailed, set the DNS
primary address.
DNS Secondary Address
When alarm reports are e-mailed, set the DNS
secondary address.

90-11: System Alarm Report

Input Data
0 = No Report
1 = E-mail Address
Up to 255 Characters
0~65535
Up to 255 Characters
Up to 255 Characters
Up to 255 Characters
0.0.0.0~255.255.255.255
0.0.0.0~255.255.255.255
Program 90 : Maintenance Program
UNIVERGE SV8100
Default
0
No
Setting
25
No
Setting
No
Setting
No
Setting
0.0.0.0
0.0.0.0