30-03: Dss Console Key Assignment - NEC Univerge SV8100 Programming Manual

UNIVERGE SV8100
Level:
SA
Description
Use Program 30-03: DSS Console Key Assignments to customize the key
assignments for 60-button DSS Consoles. A DSS Console key can have any function
with up to four digits (e.g., extension number or Service Code).
To prevent lamp problems when reassigning DSS Console keys, clearing an
extension programmed key before reassigning it is recommended [Enter key to be
cleared + 00 or
assignments and upload the change to the system before proceeding.)] Without
clearing an extension key first, the DSS Console may not show the correct lamp
display, although the DSS function works correctly.
If you are programming the system from the extension to which the DSS Console is
connected, either by phone or using the WebPro or PC Program, you may need to
unplug the DSS and plug it back in to reset the console lamping.
Input Data
Index 1
Index 2
Item
No.
01
Programming Manual
Program 30 : DSS/DLS Console Setup

30-03: DSS Console Key Assignment

00 (If using WebPro or PC Programming, delete the key

DSS Console Number
Key Number
001~114 0~99 (General Functional Level)
97 = Door Box Access key
(additional data: 1~8 Door Box No.)
00 ~
 
Level)
Function Number
99 (Appearance Functional
Issue 10.1
01~32
Additional Data
Refer to Function Number
List on the following pages.
2 - 423