Extension Data Swap - NEC Univerge SV8100 Programming Manual

UNIVERGE SV8100
Level:
IN
Description
(This program is available only via telephone programming and not through PC
Programming).
Use Program 92-04 : Extension Data Swap to swap data between two extensions.
Input Data
Item
No.
The following table lists Programs that use the Extension Data Swap function.
11-02
12-05
13-03
13-06
15-01
15-02
15-03
15-06
15-07
15-08
15-09
15-10
15-11
Programming Manual
01
1st Extension Number
02
2nd Extension Number
Program Number
Program 92 : Copy Program

92-04 : Extension Data Swap

Item
Extension Numbering
Night Mode Group Assignment for Extensions
Abbreviated Dial Group Assignment for Extensions
Station Abbreviated Dial Number and Name
Extension Basic Data Setup
Multi-Line Telephone Basic Data Setup
Single Line Telephone Basic Data Setup
Trunk Access Map for Extension
Programmable Function Key
Incoming Virtual Extension Ring Tone Setup
Virtual Extension Ring Assignment
Incoming Virtual Extension Ring Tone Order Setup
Virtual Extension Delayed Ring Assignment
Input Data
Up to eight characters.
Program Name
Issue 10.1
2 - 935