System Options For Multiline Telephones - NEC Univerge SV8100 Programming Manual

UNIVERGE SV8100
Level:
IN
Description
Use Program 20-02 : System Options for Multiline Telephones to set various

system options for multiline telephones.

Item
No.
01
02
03
Programming Manual
Program 20 : System Option Setup
20-02 : System Options for Multiline Telephones
Input Data
Item
0
Trunk Loop Key
Operation Mode (OT)
1
Incoming:
Talking:
Holding:
0
Trunk Group Access
Key Operating Mode
1
Use this option to set
2
the operating mode of
the extension trunk
group keys. The keys
are for incoming
access, outgoing
access, or both.
0
BLF Control (OT)
1
Set the conditions
under which a Hotline,
Reverse Voice Over or
DSS Console key
indicates that an
extension is busy.
Refer to the Reverse
Voice Over feature for
more information.
Input Data
= Keep Lamp
= Extinction
Mode 0 = Keep
Lamp
300 IPM Red blink
Green Light-
ing (on
Talking TEL)
60 IPM Green
blink (on
holding TEL)
= Outgoing / Incoming
= Outgoing
= Incoming
= Idle / Busy (ON/OFF)
= Busy / Idle (ON/OFF)
Default
0
1 = LED Off
LED Off
LED Off
0
1
Issue 10.1
Related
Program
2 - 239