NEC Univerge SV8100 Programming Manual page 214

Issue 10.1
Item
No.
08
10
11
12
13
15
16
2 - 178
Item
Automatic Handsfree
Use this option to set whether
pressing a key accesses a
One-Touch Key or if it preselects
the key.
Ringing Line Preference for
Trunk Calls
Use this option to select between
Idle and Ringing Line Preference
for trunk calls.
Callback Automatic Answer
Use this option to enable or disable
automatic answer of calls recalling
to a station. For example, if a
Transfer Recall or Hold Recall is
ringing back to a station, the
following happens:
If PRG 15-02-11 is enabled, the
station will automatically answers
the recall when it goes off-hook.
If PRG 15-02-11 is disabled, a
station does not automatically
answer the recall when it goes
Off-Hook. The user must first press
the line appearance of the recalling
call or press the answer key.
Off-Hook Ringing
Use this option to set the telephone
Off-Hook signaling. Off-hook
signaling occurs when a telephone
user receives a second call while
busy on a handset call. To enable/
disable Off-Hook Signaling for an
extension Class of Service, use
Program 20-13-06.
Redial List Mode
Select whether the Redial List
feature should store internal and
external numbers (0), or only
external numbers (1).
Storage of Caller-ID for
answered call
Handsfree Operation
Enable or disable an extension
ability to use the speakerphone on
outside calls. When disabled,
users can hear the conversation,
but cannot respond handsfree.
Input Data
0 = Preselect
1 = One-Touch (Automatic
Handsfree)
0 = Idle (Off)
1 = Ringing (On)
0 = Off
1 = On
0 = Muted Off-Hook
Ringing
1 = No Off-Hook Ringing
2 = Not Used
3 = Beep in Speaker (SP)
4 = Beep in Handset (HS)
5 = Speaker & Handset
Beep
0 = ICM/Trunk (Extension/
Trunk Mode)
1 = Trunk Mode
0 = Disable (Off)
1 = Enable (On)
0 = Disable (Off)
1 = Enable (On)
Program 15 : Extension, Basic Setup
UNIVERGE SV8100
Related
Default
Program
1
1
1
0 (OT)
5 (AU)
1
1
1