NEC Univerge SV8100 Programming Manual page 814

Hide thumbs Also See for Univerge SV8100:
Table of Contents

Advertisement

Issue 10.1
2 - 778
Item
No.
05
G.711 Jitter Buffer - Standard
Set the average value of the G.711 Jitter
Buffer.
Moreover, this option is adjusted with the
SV8100 as it is used by both IP terminals and
the IPLA and the range of the adjustment of
Jitter for the IP terminal is narrower and
transmitted to the IP terminal. The range of IP
terminal is 10-300 (10).
06
G.711 Jitter Buffer - Maximum
Set the maximum value of the G.711 Jitter
Buffer.
Moreover, this option is adjusted with the
SV8100 as it is used by both IP terminals and
the IPLA and the range of the adjustment of
Jitter for the IP terminal is narrower and
transmitted to the IP terminal. The range of IP
terminal is 10-300 (10).
07
G.729 Audio Frame
Maximum number of G729 Audio Frames.
G.729 assumes the audio signal made by a
specimen by 8kHz and the frame of 10ms is
assumed to be a unit to 8kbps by the
encoding compressed method.
08
G.729 Silence Compression (VAD) Mode
Select whether to compress silence with
G.729. When there is silence, the RTP packet
is not sent.
09
G.729 Jitter Buffer - Minimum
Set the minimum value of the Jitter Buffer of
G.729 is set. Jitter is the variation in the time
between packets arriving and the buffer
allows this variation to be absorbed.
Moreover, this option is adjusted with the
SV8100 as it is used by both IP terminals and
the IPLA and the range of the adjustment of
Jitter for the IP terminal is narrower and
transmitted to the IP terminal. The range of IP
terminal is 10-300 (10).
10
G.729 Jitter Buffer - Standard
Set the average G.729 Jitter Buffer.
Moreover, this option is adjusted with the
SV8100 as it is used by both IP terminals and
the IPLA and the range of the adjustment of
Jitter for the IP terminal is narrower and
transmitted to the IP terminal. The range of IP
terminal is 10-300 (10).
Item
Program 84 : Hardware Setup for VoIP
UNIVERGE SV8100
Input Data
0~255ms (Note 2)
0~255ms (Note 2)
1
= 10ms
2
= 20ms
3
= 30ms
4
= 40ms
5
= 50ms
6
= 60ms
0
= Disable
1
= Enable
0~300ms (Note 1)
0~300ms (Note 1)
Default
60
120
3
0
30
60

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents