Call Routing Mailbox Options - NEC Univerge SV8100 Programming Manual

UNIVERGE SV8100
Level:
IN
Description
Use
Call Routing Mailboxes in 47-07-02: Routing Mailbox Type.
Input Data
Item
No.
01
02
03
Programming Manual

47-08 : Call Routing Mailbox Options

Routing Mailbox Number
Dial Action Table
Use this option to assign the Dial Action Table to the
Call Routing Mailbox. The Dial Action Table defines
the dialing options for the call Routing Mailbox.
Screened Transfer Timeout
(Scrn Trf Timeout)
Use this option to set how long a Screened Transfer
(TRF) from the Automated Attendant rings an
unanswered extension before recalling.
This option has a similar function as Customize:
Mailbox Options: Call Routing: [Call Handling] Options:
Delay Rings Before Redirect Transfer in VM8000
InMail.
Time Limit for Dialing Commands
(Dialing Timeout)
This option determines how long VM8000 InMail waits
for an Automated Attendant caller to dial before routing
the call to the Timeout destination.
Be sure your Dial Action Tables have a Timeout action
programmed.
If the caller waits too long to dial:
When the associated Dial Action Table has a Timeout
action programmed, the caller routes to that
destination.
When the associated Dial Action Table does not have
a Timeout action programmed, the Instruction Menu
repeats three times and then VM8000 InMail hangs up.
Program 47 : InMail
47-08 : Call Routing Mailbox Options
to set the options for mailboxes assigned as
Item
1~32
Input Data Default
1~32 1 (Dial Action Table
(Dial Action 1)
Table 1~16)
0~255 (sec)
Entering 0
causes
immediate
recall.
0~99 (sec)
Entering 0
causes the
Automated
Attendant to
immediately
route callers to
the Timeout
destination
programmed in
the active Dial
Action Table.
Issue 10.1
15
5
2 - 579