NEC Univerge SV8100 Programming Manual page 662

Issue 10.1
Program 50 : Common Channel Interoffice Signaling Service
Level:
IN
Description
Use Program 50-03: CCIS Destination System Settings to assign information of
remote systems in a CCIS Network.
Input Data
Item
No.
01
02
03
04
Feature Cross Reference
None
2 - 626
50-03: CCIS Destination System Settings
CCIS System ID
Item
Destination Point
Code
CCIS Route ID
(T1 only)
IP Address
(IP only)
Point Code
Availability
Conditions
None
Description
Define the Point Code at the
Destination Party.
Select the CCIS Route ID defined in
Program 14-13 when the user tries to
access the system in a CCIS network.
Assign the IP Address to a CCIS
System ID.
Define if the system associated with
Destination Code can be Reached (1)
or Not Reached (0). If set to 0
(Disable), when using the IP-CCIS, that
system cannot be called until it is set to
1 (Enable).
Program 50 : Common Channel Interoffice Signaling Service
UNIVERGE SV8100
1~255
Input Data Default
0
0~16367
0~8 0
(CCIS Route IDs
5~8 are for
future use and
should not be
used.)
xxx.xxx.xxx.xxx 0.0.0.0
(xxx = 0~255)
0 = Disable 1
1 = Enable