16-02: Department Group Assignment For Extensions - NEC Univerge SV8100 Programming Manual

Issue 10.1

16-02: Department Group Assignment for Extensions

Level:
IN
Description
Use Program 16-02: Department Group Assignment for Extensions to set the
Department Groups. The system uses these groups (64 Department Groups) for
Department Calling. Assign pilot numbers to Department Groups you set up in
Program 11-07. This lets system users place calls to the departments. Use Program
16-01 to set the priority of each extension in each Department Group. When a call
comes to the group, the extensions ring in order of their priority.
Input Data
Item
No.
01

Feature Cross Reference

2 - 234
Program 16 : Department Group Setup
Extension Number
Group
Priority
Number
1~64 1~999
The initial value of a priority becomes the ports numerical order assigned in Program 11-02 and 11-04.
(Extension ports are 1~512 Virtual extension ports are 513~769.)
Conditions
None
Department Calling
Default Description
1 – xxx Set up the Department Group called by
(See
the pilot number and the extension priority
Note)
when a group is called.
Call Pickup Groups are set up in
23-02.
Program 16 : Department Group Setup
UNIVERGE SV8100
Maximum eight digits
Related
Program
11-07
16-01