Gauges, Instruments; Dash Panel Insert; General Description; Adjust/Replace Dash Panel Insert - Skoda Octavia III 2013 Workshop Manual

Hide thumbs Also See for Octavia III 2013:
Table of Contents

Advertisement

Octavia III 2013 ➤ , Octavia III 2014 ➤
Electrical system - Edition 12.2014
90 –

Gauges, instruments

1

Dash panel insert

⇒ "1.1 General description", page 24
⇒ "1.2 Adjust/replace dash panel insert", page 24
⇒ "1.3 Removing and installing dash panel insert", page 24
⇒ "1.4 Warning lights in the dash panel insert", page 26
⇒ "1.5 The self-diagnostic function of the dash panel insert", page
27
1.1

General description

Technology of the dash panel insert
The dash panel insert is supplied in three versions.
1 - Basic version with segment display "Basic"
♦ Without multi-function display
♦ With multi-function display
2 - Dash panel insert with information display (TFT) "Medium"
3 - Dash panel insert with colour information display (TFT) "Col‐
our"
All panel operations are visually identical.
Description of the function and control:
♦ ⇒ Owner's manual Octavia III
♦ ⇒ Self-study programme No. 97 ; Škoda Octavia III Vehicle
presentation
Contact assignment of plug connection on the dash panel insert
⇒ Current flow diagrams, Electrical fault finding and Fitting loca‐
tions.
1.2

Adjust/replace dash panel insert

⇒ Vehicle diagnostic tester connect online.
If the dash panel insert is replaced, the ⇒ Vehicle diagnostic tester
must be connected before the removal of the original dash panel
insert and must be confirmed in the "replace control unit" Guided
Functions. Thereby, the required values are read into the diag‐
nostic unit from the original dash panel insert. If the original dash
panel insert is not available or does not communicate with the
diagnostic unit, then proceed according to the information in the
⇒ Vehicle diagnostic tester
After fitting the new dash panel insert, adapt all ignition keys.
1.3
Removing and installing dash panel in‐
sert
Note
After reading in the information stored in the control unit, the work
sequence "adjust/replace dash panel insert" must be carried out
before replacing the dash panel insert
⇒ "1.2 Adjust/replace dash panel insert", page 24
24
Rep. gr.90 - Gauges, instruments
.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Octavia iii 2014

Table of Contents