Installing Netiron Xmr 32000 Router Power Supplies - Brocade Communications Systems MLX Series Hardware Installation Manual

3
Installing a NetIron XMR 32000 router
CAUTION
Be careful not to overtighten or cross-thread cable connector screws.
FIGURE 129
1 Cable bundles

Installing NetIron XMR 32000 router power supplies

DANGER
High Touch Current. Earth connection essential before connecting supply.
Follow the steps to install a power supply in a NetIron XMR 32000 router. You will need a #2
Phillips screw driver.
1. Remove the power supply slot blank.
2. Remove the power supply from the packaging.
3. Insert the power supply into the empty power supply slot, using the guides provided on either
FIGURE 130
188
Accessing modules by shifting cable bundles
1
side of the slot.
Installing a power supply in a NetIron XMR 32000 router
Brocade MLX Series and NetIron XMR Hardware Installation Guide
53-1003821-01