Brocade Communications Systems MLX Series Hardware Installation Manual page 301

2. Remove the old air filter by pulling it straight out from the router, as shown in
3. Insert a new filter, being careful that it aligns within the narrow channel.
4. Repeat steps 2 and 3 to replace the second filter.
5. Replace the air inlet cover and tighten the four captive screws to secure the air filter to the
FIGURE 163
1
Brocade MLX Series and NetIron XMR Hardware Installation Guide
53-1003821-01
router.
Air filter removal and replacement for 32-slot routers
Direction of airflow in device
Replacing fan assemblies
Figure
7
163.
285