Brocade Communications Systems MLX Series Hardware Installation Manual page 303

Replacing the air filter in Brocade MLX and NetIron XMR 4-slot and 8-slot routers
Follow these steps to replace the air filter in 4-slot and 8-slot routers.
1. Loosen the two screws in the front of the filter retainer.
2. Pull the filter retainer away from the router as shown in
FIGURE 165
1 Direction of airflow in device
2 Filter
FIGURE 166
1 Direction of airflow in device
2 Filter
3. Pull the old air filter out of the router and discard it.
4. Insert the replacement air filter by sliding it along the metal guides.
Brocade MLX Series and NetIron XMR Hardware Installation Guide
53-1003821-01
Air filter removal and replacement for a Brocade MLX or NetIron XMR 4-slot router.
3 Filter retainer
4 Fan trap
Air filter removal and replacement for the 8-slot router.
3 Filter retainer
4 Fan trap
Replacing fan assemblies
Figure 165 or Figure 166.
7
287