Hardware Specifications; Hardware Specifications For Brocade Mlx Routers; Power Specifications - Brocade Communications Systems MLX Series Hardware Installation Manual

Hardware Specifications

This chapter describes hardware specifications for Brocade MLX and NetIron XMR routers.

Hardware specifications for Brocade MLX routers

The following sections describe hardware specifications for Brocade MLX routers.

Power specifications

The following power supply frequency requirements apply to Brocade MLX 4-slot, 8-slot, and 16-slot
routers:
•
•
•
•
The following power supply frequency requirements apply to the Brocade MLX-32 routers:
•
•
•
•
Table 43
installed, and with only the specified interface modules installed.
TABLE 43
Model
MLX routers with 8x10G interface modules only
MLX-4
Brocade MLX Series and NetIron XMR Hardware Installation Guide
53-1003821-01
AC Input Rating: 100 to 240V, 50/60 Hz, 16.0 A maximum per power supply
AC Operating Voltage Range: 90 - 264V, 50/60 Hz
•
Inrush current: 40A peak maximum at 25 degrees C (77 degrees F)
DC Input Rating: -48V, 30.0 A maximum per power supply
DC Operating Range: -40 to -60V
•
Inrush current: 45A peak maximum at 25 degrees C (77 degrees F)
AC Input Rating: 200 -240V, 50/60 Hz, 16.0 A maximum per power supply
AC Operating Voltage Range: 180 to 264V
•
Inrush current: 30A peak maximum at 25 degrees C (77 degrees F)
DC Input Rating: -48V
•
75A maximum per power supply (2400W PSU)
•
80A maximum per power supply (3000W PSU)
DC Operating Range: -40 to -60V
•
<70A peak for any initial current surge or spike of 10mS or less at either cold or warm
start
lists power consumption information for Brocade MLX routers with all base components
Brocade MLX router power consumption values
@100 VAC
Amps Watts
14 1389
@200 VAC
BTU/hr Amps Watts
4740 7 1389
@-48VDC
BTU/hr Amps Watts
4740 29 1389
Chapter
8
BTU/hr
4740
293