Brocade Communications Systems MLX Series Hardware Installation Manual page 64

2
Installing 2x100GbE interface modules in Brocade MLX routers
FIGURE 33
FIGURE 34
48
NOTE
The 2x100G interface module is sensitive to dust and debris. Keep the optics covers in place
until you are ready to connect the fiber cable. Clean all fiber cables properly before you
connect them to the 2x100G interface module.
Installing 2x100G modules in a 4- or 8-slot device (4-slot shown)
Installing 2x100G modules in a 16- or 32-slot device (16-slot shown)
Brocade MLX Series and NetIron XMR Hardware Installation Guide
53-1003821-01