Removing Brocade Mlx-32 Router Dc Power Supplies; Final Steps; Attaching A Management Station - Brocade Communications Systems MLX Series Hardware Installation Manual

Hide thumbs Also See for MLX Series:
Table of Contents

Advertisement

2

Attaching a management station

Removing Brocade MLX-32 router DC power supplies

Follow these steps to remove a 2400W DC power supply in a Brocade MLX-32 router:
1. Ensure the main DC power breaker is OFF.
2. Use a #1 Phillips screwdriver to remove screw that secures the safety cover, as shown in
3. Use a #2 Phillips screwdriver to remove the screws securing the power lugs. Refer to
4. Pull down on handle to remove power supply. Refer to
Follow these steps to remove a 3000W DC power supply in a Brocade MLX-32 router:
1. Ensure the main DC power breaker is OFF.
2. Use a #1 Phillips screwdriver to remove the screw that secures the safety cover, as shown in
3. Pull down on the handle to remove the 3000W power supply. Refer to
4. Use a #2 Phillips screwdriver to remove the screws securing the power lugs. Refer to

Final steps

Complete these steps in the order in which they are listed:
Attaching a management station
You can manage your router in the following ways:
122
Figure 86
on page 120. Remove the safety cover.
on page 120.
Figure 86
on page 120.
on page 120.
"Attaching a management station"
"Activating the power source"
"Verifying proper operation"
Connect a PC or terminal to the console port on the management module. From this port, you
can assign an IP address to the management module and establish connections through
Telnet or SSH.
Connect the router to your existing management network and manage the router and other
network devices from a management station.
NOTE
The management network that you connect to through the 10/100 Ethernet port must be
separate and isolated from the network over which user packets are switched and routed. For
information about functionality on the management port, Refer to
management port functions"
Figure 84
on page 217.
Brocade MLX Series and NetIron XMR Hardware Installation Guide
Figure 87
on page 117.
Figure 84
on page 117.
Figure 87
"Understanding
53-1003821-01

Advertisement

Table of Contents
loading

Table of Contents