Brocade Communications Systems MLX Series Hardware Installation Manual page 136

2
Installing a Brocade MLX-32 router
1. Use a#1 Phillips screwdriver to remove the screw that secures the safety cover, as shown in
FIGURE 86
2. Use a #2 Phillips screwdriver to unscrew the power lugs. Refer to
FIGURE 87
1
3. Crimp the correct AWG power supply wire into the power lugs:
120
Figure 86. Remove the safety cover.
Removing the safety cover
Removing the power lugs (2400W power supply and 3000W power supply displayed)
Power lug screws 2
#4 AWG wire for 2400 W power supply
#2 AWG for 3000 W power supply
Refer to Figure 87.
Power lug
Brocade MLX Series and NetIron XMR Hardware Installation Guide
Figure 87.
53-1003821-01