Brocade Communications Systems 5600 Configuration Manual
  1. Manuals
  2. Brands
  3. Brocade Communications Systems Manuals
  4. Network Router
  5. 5600 vRouter
  6. Configuration manual
Brocade Communications Systems 5600 Configuration Manual

Brocade Communications Systems 5600 Configuration Manual

Vrouter
Hide thumbs Also See for 5600:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Reference Manual, Configuration Manual
CONFIGURATION GUIDE
Brocade 5600 vRouter
RIPng Configuration Guide, 5.0R1
Supporting Brocade 5600 vRouter 5.0R1
53-1004512-01
15 August 2016

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 5600 and is the answer not in the manual?

Questions and answers

Related Manuals for Brocade Communications Systems 5600

Summary of Contents for Brocade Communications Systems 5600

  • Page 1 CONFIGURATION GUIDE Brocade 5600 vRouter RIPng Configuration Guide, 5.0R1 Supporting Brocade 5600 vRouter 5.0R1 53-1004512-01 15 August 2016...
  • Page 2 United States government. The authors and Brocade Communications Systems, Inc. assume no liability or responsibility to any person or entity with respect to the accuracy of this document or any loss, cost, liability, or damages arising from the information contained herein or the computer programs that accompany it.

  • Page 3: Table Of Contents

    35 show ipv6 route ripng................................................36 show ipv6 ripng...................................................37 show monitoring protocols ripng............................................39 Route Redistribution Commands..............................................41 protocols ripng redistribute bgp............................................42 protocols ripng redistribute connected..........................................43 protocols ripng redistribute kernel........................................... 44 Brocade 5600 vRouterRIPng Configuration Guide, 5.0R1 53-1004512-01...
  • Page 4 VRF support for monitoring and logging commands..................................61 Command support for VRF routing instances......................................62 Adding a VRF routing instance to a Configuration mode command..........................62 Adding a VRF routing instance to an Operational mode command..........................64 List of Acronyms....................................................65 Brocade 5600 vRouterRIPng Configuration Guide, 5.0R1 53-1004512-01...

  • Page 5: Preface

    In Fibre Channel products, square brackets may be used instead for this purpose. x | y A vertical bar separates mutually exclusive elements. < > Nonprinting characters, for example, passwords, are enclosed in angle brackets. Brocade 5600 vRouterRIPng Configuration Guide, 5.0R1 53-1004512-01...

  • Page 6: Notes, Cautions, And Warnings

    For product support information and the latest information on contacting the Technical Assistance Center, go to http:// www.brocade.com/services-support/index.html. If you have purchased Brocade product support directly from Brocade, use one of the following methods to contact the Brocade Technical Assistance Center 24x7. Brocade 5600 vRouterRIPng Configuration Guide, 5.0R1 53-1004512-01...

  • Page 7: Brocade Oem Customers

    By sending your feedback to documentation@brocade.com. Provide the publication title, part number, and as much detail as possible, including the topic heading and page number if applicable, as well as your suggestions for improvement. Brocade 5600 vRouterRIPng Configuration Guide, 5.0R1 53-1004512-01...
  • Page 8 Preface Brocade 5600 vRouterRIPng Configuration Guide, 5.0R1 53-1004512-01...

  • Page 9: About This Guide

    About This Guide This guide describes how to configure Routing Information Protocol next generation (RIPng) on the Brocade 5600 vRouter (referred to as a virtual router, vRouter, or router in the guide). Brocade 5600 vRouterRIPng Configuration Guide, 5.0R1 53-1004512-01...
  • Page 10 About This Guide Brocade 5600 vRouterRIPng Configuration Guide, 5.0R1 53-1004512-01...

  • Page 11: Ripng Configuration

    This section presents an example configuration of RIPng. The configuration example is based on the reference diagram in the following figure. This example shows the configuration of the nodes by using dynamic IPv6 routing with RIPng to enable R3 and R4 to communicate through R1 and R2. Brocade 5600 vRouterRIPng Configuration Guide, 5.0R1 53-1004512-01...

  • Page 12: Enabling Forwarding On R1 And R2

    Enabling RIPng on an interface To allow dynamic routing by using RIPng, RIPng must be enabled on the interfaces that are to use it. To enable RIPng on R1, perform the following steps in configuration mode. Brocade 5600 vRouterRIPng Configuration Guide, 5.0R1 53-1004512-01...

  • Page 13: Advertising Connected Networks

    The redistribute command is then used to advertise the connected networks. To advertise connected networks on R1, perform the following steps in configuration mode. TABLE 3 Advertising connected networks on R1 Step Command Advertise connected networks through RIPng. vyatta@R1# set protocols ripng redistribute connected Commit the change. vyatta@R1# commit Brocade 5600 vRouterRIPng Configuration Guide, 5.0R1 53-1004512-01...

  • Page 14: Confirming Visibility Of Remote Networks

    TABLE 5 Confirming connectivity between R4 and R3 Step Command Ping R3 from R4. vyatta@R4:~$ ping 2001:db8:3::3 PING 2001:db8:3::3(2001:db8:3::3) 56 data bytes 64 bytes from 2001:db8:3::3: icmp_seq=1 ttl=62 time=5.98 ms 64 bytes from 2001:db8:3::3: icmp_seq=2 ttl=62 time=0.603 ms Brocade 5600 vRouterRIPng Configuration Guide, 5.0R1 53-1004512-01...
  • Page 15 Rcx - RIP connect suppressed, Rsx - RIP static suppressed, K - Kernel, C - Connected, S - Static, O - OSPF, I - IS-IS, B - Network Next Hop Time 2001:db8:1::/64 dp0p1p1 2001:db8:2::/64 2001:db8:1::1 dp0p1p1 2001:db8:3::/64 2001:db8:1::1 dp0p1p1 Brocade 5600 vRouterRIPng Configuration Guide, 5.0R1 53-1004512-01...
  • Page 16 RIPng Configuration Brocade 5600 vRouterRIPng Configuration Guide, 5.0R1 53-1004512-01...

  • Page 17: Router-Level Configuration Commands

    <seconds>................................33 ∙ protocols ripng timers update <seconds>................................34 ∙ reset ipv6 ripng route........................................35 ∙ show ipv6 route ripng........................................36 ∙ show ipv6 ripng...........................................37 ∙ show monitoring protocols ripng..................................... 39 Brocade 5600 vRouterRIPng Configuration Guide, 5.0R1 53-1004512-01...

  • Page 18: Monitor Protocol Ripng Disable Events

    Disables the generation of debug messages that are related to RIPng events. Syntax monitor protocol ripng disable events Modes Operational mode Usage Guidelines Use this command to disable the generation of debug (trace-level) messages that are related to RIPng events. Brocade 5600 vRouterRIPng Configuration Guide, 5.0R1 53-1004512-01...

  • Page 19: Monitor Protocol Ripng Disable Packet

    Disables debugging of all received packets. send Disables debugging of all sent packets. Modes Operational mode Usage Guidelines Use this command to disable the generation of debug (trace-level) messages that are related to RIPng packet types. Brocade 5600 vRouterRIPng Configuration Guide, 5.0R1 53-1004512-01...

  • Page 20: Monitor Protocol Ripng Disable Rib

    Debug messages are disabled for actions that are related to the RIPng RIB. Modes Operational mode Usage Guidelines Use this command to disable the generation of debug (trace-level) messages that are related to the RIPng RIB. Brocade 5600 vRouterRIPng Configuration Guide, 5.0R1 53-1004512-01...

  • Page 21: Monitor Protocol Ripng Enable Events

    Enables the generation of debug messages that are related to RIPng events. Syntax monitor protocol ripng enable events Modes Operational mode Usage Guidelines Use this command to enable the generation of debug (trace-level) messages that are related to RIPng events. Brocade 5600 vRouterRIPng Configuration Guide, 5.0R1 53-1004512-01...

  • Page 22: Monitor Protocol Ripng Enable Packet

    Enables debugging of all received packets. send Enables debugging of all sent packets. Modes Operational mode Usage Guidelines Use this command to enable the generation of debug (trace-level) messages that are related to all RIPng packet types. Brocade 5600 vRouterRIPng Configuration Guide, 5.0R1 53-1004512-01...

  • Page 23: Monitor Protocol Ripng Enable Rib

    Debug messages are generated for actions that are related to the RIPng RIB. Modes Operational mode Usage Guidelines Use this command to enable the generation of debug (trace-level) messages that are related to the RIPng RIB. Brocade 5600 vRouterRIPng Configuration Guide, 5.0R1 53-1004512-01...

  • Page 24: Protocols Ripng Aggregate-Address

    Use the set form of this command to specify a contiguous block of IPv6 addresses to aggregate. Use the delete form of this command to delete an aggregate address. Use the show form of this command to display aggregate address configuration settings. Brocade 5600 vRouterRIPng Configuration Guide, 5.0R1 53-1004512-01...

  • Page 25: Protocols Ripng Default-Information Originate

    Use the delete form of this command to restore the default behavior for default route generation into RIPng; that is, a default route is not generated. Use the show form of this command to display the default configuration of route generation into RIPng. Brocade 5600 vRouterRIPng Configuration Guide, 5.0R1 53-1004512-01...

  • Page 26: Protocols Ripng Default-Metric

    Use the delete form of this command to restore the default RIPng metric for external routes that are redistributed into RIPng; that is, routes are assigned a metric of 1. Use the show form of this command to display the default metric for external routes that are redistributed into RIPng. Brocade 5600 vRouterRIPng Configuration Guide, 5.0R1 53-1004512-01...

  • Page 27: Protocols Ripng Log

    { log { events packet Usage Guidelines Use the set form of this command to enable routing information protocol (RIP)ng logs. Use the delete form of this command to remove RIPng logs. Brocade 5600 vRouterRIPng Configuration Guide, 5.0R1 53-1004512-01...
  • Page 28 Router-level Configuration Commands Use the show form of this command to view RIPng logs. Brocade 5600 vRouterRIPng Configuration Guide, 5.0R1 53-1004512-01...

  • Page 29: Protocols Ripng Log Packet

    Use the set form of this command to enable routing information protocol (RIP)ng packet logs. Use the delete form of this command to remove RIPng packet logs. Use the show form of this command to view RIPng packet logs. Brocade 5600 vRouterRIPng Configuration Guide, 5.0R1 53-1004512-01...

  • Page 30: Protocols Ripng Passive-Interface

    Use the delete form of this command to disable the suppression of updates to RIPng routing on an interface. Use the show form of this command to display the configuration of RIPng route suppression for an interface. Brocade 5600 vRouterRIPng Configuration Guide, 5.0R1 53-1004512-01...

  • Page 31: Protocols Ripng Route

    Use the set form of this command to set a static route in RIPng. Use the delete form of this command to remove an RIPng static route. Use the show form of this command to display RIPng static route configuration. Brocade 5600 vRouterRIPng Configuration Guide, 5.0R1 53-1004512-01...

  • Page 32: Protocols Ripng Timers Garbage-Collection

    Use the delete form of this command to restore the default timer interval for RIPng garbage collection, which is 120 seconds. Use the show form of this command to display the current timer interval for RIPng garbage collection. Brocade 5600 vRouterRIPng Configuration Guide, 5.0R1 53-1004512-01...

  • Page 33: Protocols Ripng Timers Timeout

    Use the delete form of this command to restore the default interval for RIPng time-outs, which is 180 seconds. Use the show form of this command to display the current interval for RIPng time-outs. Brocade 5600 vRouterRIPng Configuration Guide, 5.0R1 53-1004512-01...

  • Page 34: Protocols Ripng Timers Update

    Use the delete form of this command to restore the default interval for RIPng updates, which is 30 seconds. Use the show form of this command to display the current interval for RIPng updates. Brocade 5600 vRouterRIPng Configuration Guide, 5.0R1 53-1004512-01...

  • Page 35: Reset Ipv6 Ripng Route

    ( x:x::x:x/M ), a destination IPv6 address, from the RIPng routing table. Removes entries that match Modes Operational mode. Usage Guidelines Use the reset ipv6 ripng route all command to clear the RIPng routing table. Brocade 5600 vRouterRIPng Configuration Guide, 5.0R1 53-1004512-01...

  • Page 36: Show Ipv6 Route Ripng

    Codes: K - kernel route, C - connected, S - static, R - RIPng, O - OSPFv3, I - ISIS, B - BGP, * - FIB route. R>* 2001:db8:2::/64 [120/2] via fe80::20c:29ff:fed6:816c, dp0s1, 00:43:00 R>* 2001:db8:3::/64 [120/3] via fe80::20c:29ff:fed6:816c, dp0s1, 00:00:03 vyatta@vyatta:~$ Brocade 5600 vRouterRIPng Configuration Guide, 5.0R1 53-1004512-01...

  • Page 37: Show Ipv6 Ripng

    Displays all information about RIPng. Parameters interface Optional. Displays information for RIPng interfaces. status Optional. Displays only RIPng protocol status information. Modes Operational mode Usage Guidelines Use this command to display information about RIPng. Brocade 5600 vRouterRIPng Configuration Guide, 5.0R1 53-1004512-01...
  • Page 38 Timeout after 180 seconds, garbage collect after 120 seconds Outgoing update filter list for all interface is not set Incoming update filter list for all interface is not set Default redistribution metric is 1 Redistributing: Interface dp0s1 Brocade 5600 vRouterRIPng Configuration Guide, 5.0R1 53-1004512-01...

  • Page 39: Show Monitoring Protocols Ripng

    Router-level Configuration Commands show monitoring protocols ripng Displays RIPng protocol debugging flags. Syntax show monitoring protocols ripng Modes Operational mode Usage Guidelines Use this command to display how debugging is set for RIPng. Brocade 5600 vRouterRIPng Configuration Guide, 5.0R1 53-1004512-01...
  • Page 40 Router-level Configuration Commands Brocade 5600 vRouterRIPng Configuration Guide, 5.0R1 53-1004512-01...

  • Page 41: Route Redistribution Commands

    Route Redistribution Commands ∙ protocols ripng redistribute bgp....................................42 ∙ protocols ripng redistribute connected................................. 43 ∙ protocols ripng redistribute kernel................................... 44 ∙ protocols ripng redistribute ospfv3..................................45 ∙ protocols ripng redistribute static.....................................46 Brocade 5600 vRouterRIPng Configuration Guide, 5.0R1 53-1004512-01...

  • Page 42: Protocols Ripng Redistribute Bgp

    BGP routes. Use the delete form of this command to remove the current configuration of BGP route redistribution. Use the show form of this command to display the current configuration of BGP route redistribution. Brocade 5600 vRouterRIPng Configuration Guide, 5.0R1 53-1004512-01...

  • Page 43: Protocols Ripng Redistribute Connected

    Use the delete form of this command to remove the current configuration of directly connected route redistribution. Use the show form of this command to display the current configuration of directly connected route redistribution. Brocade 5600 vRouterRIPng Configuration Guide, 5.0R1 53-1004512-01...

  • Page 44: Protocols Ripng Redistribute Kernel

    Use the delete form of this command to remove the current configuration of kernel route redistribution. Use the show form of this command to display the current configuration of kernel route redistribution. Brocade 5600 vRouterRIPng Configuration Guide, 5.0R1 53-1004512-01...

  • Page 45: Protocols Ripng Redistribute Ospfv3

    OSPFv3 routes. Use the delete form of this command to remove the current configuration of OSPFv3 route redistribution. Use the show form of this command to display the current configuration of OSPFv3 route redistribution. Brocade 5600 vRouterRIPng Configuration Guide, 5.0R1 53-1004512-01...

  • Page 46: Protocols Ripng Redistribute Static

    Use the delete form of this command to remove the current configuration of static route redistribution. Use the show form of this command to display the current configuration of static route redistribution. Brocade 5600 vRouterRIPng Configuration Guide, 5.0R1 53-1004512-01...

  • Page 47: Route Filtering Commands

    Route Filtering Commands ∙ protocols ripng distribute-list access-list................................48 ∙ protocols ripng distribute-list interface <interface-name> access-list....................49 ∙ protocols ripng distribute-list interface <interface-name> prefix-list....................50 ∙ protocols ripng distribute-list prefix-list................................. 51 Brocade 5600 vRouterRIPng Configuration Guide, 5.0R1 53-1004512-01...

  • Page 48: Protocols Ripng Distribute-List Access-List

    Use the delete form of this command to remove the filtering of RIPng inbound or outbound packets by an access list. Use the show form of this command to display RIPng access list filtering configuration. Brocade 5600 vRouterRIPng Configuration Guide, 5.0R1 53-1004512-01...

  • Page 49: Protocols Ripng Distribute-List Interface Access-List

    Use the delete form of this command to remove the filtering of RIPng inbound or outbound packets on an interface by an access list. Use the show form of this command to display RIPng access list filtering configuration for an interface. Brocade 5600 vRouterRIPng Configuration Guide, 5.0R1 53-1004512-01...

  • Page 50: Protocols Ripng Distribute-List Interface Prefix-List

    Use the delete form of this command to remove the filtering of RIPng inbound or outbound packets on an interface by a prefix list. Use the show form of this command to display RIPng prefix list filtering configuration for an interface. Brocade 5600 vRouterRIPng Configuration Guide, 5.0R1 53-1004512-01...

  • Page 51: Protocols Ripng Distribute-List Prefix-List

    Use the delete form of this command to remove the filtering of RIPng inbound or outbound packets by a prefix list. Use the show form of this command to display RIPng prefix list filtering configuration. Brocade 5600 vRouterRIPng Configuration Guide, 5.0R1 53-1004512-01...
  • Page 52 Route Filtering Commands Brocade 5600 vRouterRIPng Configuration Guide, 5.0R1 53-1004512-01...

  • Page 53: Ripng Interface Commands

    RIPng Interface Commands ∙ interfaces <interface> ipv6 ripng enable................................54 ∙ interfaces <interface> ipv6 ripng metric-offset..............................55 ∙ interfaces <interface> ipv6 ripng split-horizon..............................56 ∙ interfaces <interface> ipv6 ripng neighbor <ip-address>..........................58 Brocade 5600 vRouterRIPng Configuration Guide, 5.0R1 53-1004512-01...

  • Page 54: Interfaces Ipv6 Ripng Enable

    Use the delete form of this command to remove all RIPng configuration and disable RIPng on the interface. Use the show form of this command to display the current RIPng configuration on an interface. Brocade 5600 vRouterRIPng Configuration Guide, 5.0R1 53-1004512-01...

  • Page 55: Interfaces Ipv6 Ripng Metric-Offset

    Use the set form of this command to set a metric to add to routes that are received from RIPng on an interface. Use the show form of this command to display the current metric that is added to routes that are received from RIPng on an interface. Brocade 5600 vRouterRIPng Configuration Guide, 5.0R1 53-1004512-01...

  • Page 56: Interfaces Ipv6 Ripng Split-Horizon

    16 and propagates that information in its next update. Because 15 is the largest number of hops that can be reached on a RIPng network, increasing the metric to 16 renders the route unreachable as far as downstream Brocade 5600 vRouterRIPng Configuration Guide, 5.0R1 53-1004512-01...
  • Page 57 Use the set form of this command to configure split-horizon and split-horizon poison-reverse on an interface that is running RIPng. Use the show form of this command to display the current configuration of split-horizon. Brocade 5600 vRouterRIPng Configuration Guide, 5.0R1 53-1004512-01...

  • Page 58: Interfaces Ipv6 Ripng Neighbor

    Use the set form of this command to configure the IPv6 link-local address of a neighbor for RIPng. Use the show form of this command to display the IPv6 link-local address of the neighbor. Brocade 5600 vRouterRIPng Configuration Guide, 5.0R1 53-1004512-01...

  • Page 59: Supported Interface Types

    : The identifier of a tunnel interface you are defining. The Tunnel tunnel x , where x is a nonnegative identifier ranges from tun0 through tun integer. tunx parameters tunnel Brocade 5600 vRouterRIPng Configuration Guide, 5.0R1 53-1004512-01...
  • Page 60 The name of a VRRP interface is not specified. The system internally constructs the interface name from the parent interface identifier plus the VRRP group number; for example, dp0p1p2v99. Note that VRRP interfaces support the same feature set as does the parent interface. Brocade 5600 vRouterRIPng Configuration Guide, 5.0R1 53-1004512-01...

  • Page 61: Vrf Support

    RIB and NSM logging. If you do not use the routing-instance commands run in the context of the default routing instance. monitor protocol rip [routing-instance <instance_name>] … [routing routing-instance <instance_name>] protocols rip log … monitor protocol ripng [routing-instance <instance_name>] … Brocade 5600 vRouterRIPng Configuration Guide, 5.0R1 53-1004512-01...

  • Page 62: Command Support For Vrf Routing Instances

    Command support for VRF routing instances VRF allows a Brocade 5600 vRouter to support multiple routing tables, one for each VRF routing instance. Some commands in this guide support VRF and can be applied to particular routing instances.
  • Page 63 B. The subsequent commands complete the configuration. For more information about configuring SNMP, refer to Brocade 5600 vRouter Remote Management Configuration Guide . vyatta@R1# set service snmp community commA context RED vyatta@R1# set service snmp community commB context BLUE...

  • Page 64: Adding A Vrf Routing Instance To An Operational Mode Command

    'test' vyatta@vyatta:~$ show snmp v3 trap-target SNMPv3 Trap-targets: Trap-target Port Protocol Auth Priv Type EngineID Routing-Instance User ----------- ---- -------- ---- ---- ---- -------- ---------------- ---- 2.2.2.2 '162' 'udp' 'md5 'infor 'BLUE' 'test' Brocade 5600 vRouterRIPng Configuration Guide, 5.0R1 53-1004512-01...

  • Page 65: List Of Acronyms

    Amazon Elastic Compute Cloud Exterior Gateway Protocol ECMP equal-cost multipath Encapsulating Security Payload Forwarding Information Base File Transfer Protocol Generic Routing Encapsulation HDLC High-Level Data Link Control Input/Output ICMP Internet Control Message Protocol Brocade 5600 vRouterRIPng Configuration Guide, 5.0R1 53-1004512-01...
  • Page 66 Network Time Protocol OSPF Open Shortest Path First OSPFv2 OSPF Version 2 OSPFv3 OSPF Version 3 Pluggable Authentication Module Password Authentication Protocol Port Address Translation peripheral component interconnect Protocol Independent Multicast PIM-DM PIM Dense Mode Brocade 5600 vRouterRIPng Configuration Guide, 5.0R1 53-1004512-01...
  • Page 67 Temporal Key Integrity Protocol Type of Service TCP Maximum Segment Size transmit User Datagram Protocol virtual hard disk virtual interface VLAN virtual LAN Amazon virtual private cloud virtual private network VRRP Virtual Router Redundancy Protocol Brocade 5600 vRouterRIPng Configuration Guide, 5.0R1 53-1004512-01...
  • Page 68 List of Acronyms Acronym Description wide area network wireless access point Wired Protected Access Brocade 5600 vRouterRIPng Configuration Guide, 5.0R1 53-1004512-01...

Table of Contents