Netiron Xmr Routers - Brocade Communications Systems MLX Series Hardware Installation Manual

1
Hardware features

NetIron XMR routers

NetIron XMR Series routers are available in the following models:
•
•
•
•
The following sections described the components you can install in the router slots. For a detailed
list of components that ships with each router, refer to the appropriate installation section for each
router.
NetIron XMR 4000 router components
You can install the following components in the router slots:
•
•
•
•
Figure 5
FIGURE 5
1 Interface slot 2
2 Switch fabric slot 2
3 Switch fabric slot 3
NetIron XMR 8000 router components
You can install the following components in the router slots:
•
6
NetIron XMR 4000: 4 interface slots (see
NetIron XMR 8000: 8 interface slots (see
NetIron XMR 16000: 16 interface slots (see
NetIron XMR 32000: 32 interface slots (see
Up to two management modules (one active and one redundant).
Up to three switch fabric modules.
Up to four interface modules.
Up to three power supplies (AC or DC).
displays the NetIron XMR 4000 router.
NetIron XMR 4000 router
4 ESD connector
5 Interface slot 1
6 Switch fabric slot 1
Up to two management modules (one active and one redundant).
Figure 5 on page 6).
Figure 6 on page 7).
Figure 7 on page 7).
Figure 8 on page 9).
7 Interface slot 3
8 Management slot 1
9 Management slot 2
Brocade MLX Series and NetIron XMR Hardware Installation Guide
10 Interface slot 4
11 -13 Three power supplies
installed in rear of
device
53-1003821-01