Brocade Communications Systems MLX Series Hardware Installation Manual page 117

3. Adjust the telescoping rails to fit your rack. The rails can accommodate rack depths from 27 -
4. Attach the side rails to the front and back of the rack, using screws appropriate for your rack
FIGURE 69
Brocade MLX Series and NetIron XMR Hardware Installation Guide
53-1003821-01
31 inches.
type. (You must provide these screws). Refer to
NOTE
The narrow telescoping ends of the side rails should attached at the back of the rack.
Attach the telescoping side rails to the rack.
Installing a Brocade MLX-32 router
Figure 69.
2
101