Brocade Communications Systems MLX Series Hardware Installation Manual page 307

5. Orient the upward deflector on the fan assembly faceplate so that the exhaust will flow upward
6. Place the handle over the upward deflector aligning the handle with the screw holes and
FIGURE 171
Brocade MLX Series and NetIron XMR Hardware Installation Guide
53-1003821-01
and the holes in the upward deflector align with the holes where the screws secure the handle
to the fan assembly faceplate. Refer to
secure the handle to the upward deflector and fan assembly faceplate with the two screws.
Refer to Figure 171.
Upward deflector oriented correctly between the handle and fan assembly faceplate
Replacing fan assemblies
Figure 170 in step 4.
7
291