Brocade Communications Systems MLX Series Hardware Installation Manual page 50

1
Router modules
•
•
•
•
Table 17
TABLE 17
Part number
BR-MLXE-ACPWR-1800
BR-MLXE-DCPWR-1800
NI-X-ACPWR
NI-X-DCPWR
NI-X-ACPWR-A
NI-X-DCPWR-A
BR-MLXE-32-ACPWR-3000
BR-MLXE-32-DCPWR-3000
NIBI-32-ACPWR-A
NIBI-32-DCPWR
Brocade MLX Series and NetIron XMR routers support the following power supply options:
•
•
•
NOTE
1800W AC power supplies support low and high line operation. For line voltages between 90 - 180,
the power supply operates at 1200W. For line voltages between 180 - 264, the power supply
operates at 1800W.
34
1800W AC or DC power supply
2100W AC or DC power supply
2400W AC or DC power supply
3000W AC or DC power supply
lists the power supplies that are available for Brocade MLX and NetIron XMR routers.
Power supplies
Description
16-, 8- and 4-slot MLXe and 16- and 8-Slot XMR/MLX AC 1800W power supply.
16-, 8- and 4-slot MLXe and 16- and 8-Slot XMR/MLX DC 1800W power supply.
16-, 8- and 4-slot MLXe and 16- and 8-Slot XMR/MLX AC 1200W power supply.
16-, 8- and 4-slot MLXe and 16- and 8-Slot XMR/MLX DC 1200W power supply.
4-Slot NetIron XMR/MLX AC 1200W power supply.
4-Slot NetIron XMR/MLX DC 1200W power supply.
32-slot NetIron MLXe/XMR/MLX AC 3000W power supply.
32-slot NetIron MLXe/XMR/MLX DC 3000W power supply.
32-Slot NetIron MLXe/XMR/MLX AC 2400W power supply.
32-Slot NetIron MLXe/XMR/MLX DC 2400W power supply.
4-slot router: Can accommodate three 1200W power supplies. For power redundancy you must
purchase additional power supplies depending on how you populate your router. For
determining the number of power supplies required for redundancy, refer to Chapter 7,
"Hardware Specifications".
8-slot router: Can accommodate up to four 1200W or 1800W AC and DC power supplies.
Because power is supplied over a common power bus, any power supply installed in addition to
the minimum required provides backup for any supply that fails. For power redundancy, you
must purchase additional power supplies depending on how you populate your router. For
determining the number of power supplies required for redundancy, refer to Chapter 7,
"Hardware Specifications".
16-slot router: Can accommodate eight 1200W or 1800W AC and DC power supplies. Because
power is supplied over a common power bus, any power supply installed in addition to the
minimum required provides backup for any power supply that fails. For power redundancy, you
must purchase additional power supplies depending on how you populate your router. For
determining the number of power supplies required for redundancy, refer to Chapter 7,
"Hardware Specifications".
Brocade MLX Series and NetIron XMR Hardware Installation Guide
53-1003821-01