Brocade Communications Systems MLX Series Hardware Installation Manual page 134

2
Installing a Brocade MLX-32 router
1
2
3
4
5
CAUTION
Carefully follow the mechanical guides on each side of the power supply slot and make sure the
power supply is properly inserted in the guides. Never insert the power supply upside down.
4. Push the power supply front panel toward the back of the router to engage the backplane
5. Pull the release latch on the power supply front panel up to lock the power supply in place, and
6. Install a blank power supply faceplate into each empty slot.
118
Power supply indicators
AC OK
DC OK
ALM
Latch handle open
connector.
screw the retaining screw into place.
6 Latch handle locked
7 Power supply blank cover
8 Pull down on plunger to remove
9 Power supply
Brocade MLX Series and NetIron XMR Hardware Installation Guide
53-1003821-01